[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Pine



On Tue, Feb 08, 2000 at 03:46:33PM -0000, Richard wrote:
> isdnctrl dial ippp0 (connects)

	I assume that this is the command you use to start PPP under
ISDN.

> fetchmail --protocol POP3  --username  "richard"  "domain.co.uk"
> it said "enter password for r.ibbotson [at] zetnet.co.uk".  Which I did.
> and it came back with.....
> fetchmail:  POP3 connection to zetnet.co.uk failed: No route to host.
> fetchmail:  Query status=2

	You have to provide the mail server's address, not the domain.
In this case, it probably is mail.zetnet.co.uk. So replace the
domain.co.uk bit by mail.zetnet.co.uk

	To make sure this is your mail server try
	telnet mail.zetnet.co.uk 110

	If you get a +OK... message, type
	USER user_name
	You should get
	+OK user_name selected

	Regards,
	José
José L Gómez Dans			PhD student
					Radar & Communications Group
					Department of Electronic Engineering
					University of Sheffield UK
---------------------------------------------------------------------
Sheffield Linux User's Group - http://www.sheflug.co.uk
To unsubscribe from this list send mail to
- <sheflug-request [at] vuw.ac.nz> - with the word 
 "unsubscribe" in the body of the message. 

  GNU the choice of a complete generation.