Re: [Sheflug] Re: KDE2 and Qt 2.2

[Craig Andrews <nospam [at] fishbot.org.uk>]

Remove the -S 180 should do it. The -c 1 enables 32 bit mode, -d 1 enables
DMA, and -k 1 sets the 'keep_settings_over_reset' flag. Got this from 'man
hdparm' :-)


Craig Andrews
craig@fishbot.org.uk

- - - - - - - - - - - - - - - - - -
Life would be so much easier if we 
could just look at the source code.
- - - - - - - - - - - - - - - - - -

On Sat, 23 Sep 2000, Richard wrote:

> Ross
> 
> ross wrote:
>  
> > this is what i use in my /etc/rc.d/rc.local   script
> > 
> > hdparm -c 1 -d 1 -k 1 -S 180 /dev/hda
> > 
> > this enables DMA and 32bit mode and causes the disk to spin down after about
> > 20 minutes.... you'll see a fantastic change (if it works!)
> 
> How do I use this to enable 32-bit mode and enable DMA without
> spinning the disk down ?
> 
> Thanks
> 
> -- 
> Richard
> Sheffield UK
> 
> ---------------------------------------------------------------------
> Sheffield Linux User's Group - http://www.sheflug.co.uk
> To unsubscribe from this list send mail to
> - <sheflug-request [at] vuw.ac.nz> - with the word 
>  "unsubscribe" in the body of the message. 
> 
>   GNU the choice of a complete generation.
> 
> 

---------------------------------------------------------------------
Sheffield Linux User's Group - http://www.sheflug.co.uk
To unsubscribe from this list send mail to
- <sheflug-request [at] vuw.ac.nz> - with the word 
 "unsubscribe" in the body of the message. 

  GNU the choice of a complete generation.