[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Sheflug] Re: Network

To: shef-lug [at] xxxxxxxxxxxxxxxxxxx
Subject: Re: [Sheflug] Re: Network
From: Will Newton <xxxxx [at] xxxxxxxxxxxxxxxxxxxx>
Date: Fri, 3 May 2002 15:50:21 +0100
Envelope-to: <shef-lug [at] list.sheflug.org.uk>
List-help: <mailto:shef-lug-request [at] list.sheflug.org.uk?subject=help>
List-id: Sheflug <shef-lug.list.sheflug.org.uk>
List-post: <mailto:shef-lug [at] list.sheflug.org.uk>
List-subscribe: <http://community.uklinux.net/mailman/listinfo/shef-lug>,<mailto:shef-lug-request [at] list.sheflug.org.uk?subject=subscribe>
List-unsubscribe: <http://community.uklinux.net/mailman/listinfo/shef-lug>,<mailto:shef-lug-request [at] list.sheflug.org.uk?subject=unsubscribe>
Reply-to: shef-lug [at] xxxxxxxxxxxxxxxxxxx
Sender: shef-lug-admin [at] xxxxxxxxxxxxxxxxxxx

On Friday 03 May 2002 3:15 pm, you wrote:

> computer on a 192.168.0.0 network could see any other, I didn't realise
> that the firewall had to be set to 192.168.0.1 (or .254). I asked richard

It doesn't. It's just easier to remember when you are setting up a new 
machine "Is the gateway 192.168.0.73 or 192.168.0.74?". If it's 192.168.0.1 
then you won't forget. Just remember that addresses ending in 0 or 255 are 
reserved (i.e. don't use them for machine addresses).
___________________________________________________________________

Sheffield Linux User's Group -
http://www.sheflug.co.uk/mailfaq.html

  GNU the choice of a complete generation.

References:
- [Sheflug] Network
  - From: Darrell Blake
- Re: [Sheflug] Re: Network
  - From: Chris J
- Re: [Sheflug] Re: Network
  - From: Darrell Blake

Prev by Date: Re: [Sheflug] Re: Network
Next by Date: Re: [Sheflug] Network
Previous by thread: Re: [Sheflug] Re: Network
Next by thread: Re: [Sheflug] Re: Network
Index(es):
- Date
- Thread