Re: [Sheflug] Re: Printing

["Ian Wright" <nospam [at] iw63.freeserve.co.uk>]

Thanks Jose,

When I do a status check in lpc it tells me:

queueing is enabled
printing is enabled
2 entries in spool area
no daemon present

doing a restart in lpc gives the messages:

lp:
no daemon to abort
lp:
daemon started

However, when I do another 'status', I get the same message as I did
initially - i.e. no daemon present.

I assume its meaning lpd but that seems to be there in /var/spool and seems
to start when the machine does. I've checked the kernel config (by doing a
make xconfig) and parallel printing is in there. Do I need to reinstall one
of the rpms or is there some other file I could look at to see why lpd isn't
working - or is it maybe some other daemon, I'm out of my depth on this one.
Thanks,

Ian
--
Ian W. Wright
Sheffield  UK
www.iw63.freeserve.co.uk
----- Original Message -----
From: "José Luis Gómez Dans" <j.l.gomez-dans [at] sheffield.ac.uk>
To: "Sheflug" <sheflug [at] vuw.ac.nz>
Sent: 03 November 2000 10:24
Subject: Re: [Sheflug] Re: Printing


Hi Ian,
On Thu, Nov 02, 2000 at 08:13:38PM -0000, Ian Wright wrote:
> It an Epson Stylus 1520 which is supported. The problem seems to be a bit
> more fundamental than just the printer type in that it is complaining
about
> the daemon - or is this specific to the individual printer?

I think your problem arises from the fact that there isn't
either a printer spooler present, or to the spooler simply not doing
it's job, being depressed by some lack of configuration. If you use lpd
or lprng (I think RH uses either of those), try to check the status of
the printer with lpc. In here, you can restart them and do all sorts of
nifty things.

I did have similar problems when having a Parallel port Zip disk
connected. Make sure you have the lp module in the kernel and look at
the printer logs in /var/log. Unfortunately, I haven't still had my
coffee, so I can't be of much more help at the moment, but it should be
easy to sort out.

Best regards,
José
--
José L Gómez Dans PhD student
Radar & Communications Group
Department of Electronic Engineering
University of Sheffield UK
---------------------------------------------------------------------
Sheffield Linux User's Group - http://www.sheflug.co.uk
To unsubscribe from this list send mail to
- <sheflug-request [at] vuw.ac.nz> - with the word
 "unsubscribe" in the body of the message.

  GNU the choice of a complete generation.




---------------------------------------------------------------------
Sheffield Linux User's Group - http://www.sheflug.co.uk
To unsubscribe from this list send mail to
- <sheflug-request [at] vuw.ac.nz> - with the word 
 "unsubscribe" in the body of the message. 

  GNU the choice of a complete generation.